3003 Aluminum Flattened Expanded Sheet
(7) Don't see what you're looking for?Contact our friendly sales team for expert assistance in locating the right product for your needs.
Standards
ASTM-B-209 QQ-A-250/2
Principal Design Features
3003 Aluminum is alloyed with 1.20% manganese, which increases the strength of 3003 over commercially pure aluminum (1100 series). 3003 has excellent workability, weldability and good corrosion resistance. It is used for drawing, forming, spinning, fuel tanks, sheet metal works and other applications that require moderate strength for aluminum with good weldability. H14 designates the temper and means that 3003 has been strain hardened and partially annealed. In this condition, 3003 can be easily formed. Embossing or debossing 3003 in this temper should not strain or crack the aluminum.
Applications
3003-H14 is widely used for stampings, spun and drawn parts and products, cooking utensils, chemical equipment, builder’s hardware, storage tanks, truck and trailer components, mail boxes, cabinets, fan blades, awnings, siding, kitchen equipment, decorative trim, architectural uses, signage applications, etc. Where greater strength is required, consider 5052-H32. 3003-H224 is a designation for a variety of tread designs for tread plate, this product is often used for walk ways, bump zones trailer decks etc.
Machinability
Machinability for 3003-H14 is considered good.
Forming
Good.
Welding
3003-H14 is readily welded using common welding techniques.
Heat Treatment
3003-H14 is not heat treatable.
For more technical information on this product, download the Product Data Sheet at the top of the page or contact our friendly professional sales team for assistance.
/Asset/Flattened_Expanded_Sheet.JPG5083 Aluminum Sheet and Plate
(35)Don't see what you're looking for?
Contact our friendly sales team for expert assistance in locating the right product for your needs.
Standards
QQ-A250/6, ASTM-B928
Principal Design Features
5083 Aluminum Sheet & Plate has exceptional thermal conductivity and higher strength than 5052. It is highly resistant to attack by seawater and industrial chemicals and is very suitable for welding. 5083 retains exceptional strength after welding and is easily formed.
Applications
5083 is commonly used in marine applications because of its corrosion resistance. It is capable of withstanding extremely low temperatures without brittleness or loss of properties, it is especially suited to the cryogenic market. 5083 is also commonly used for LNG ship construction, storage tanks, high strength welded structures, armor plate, drill rigs and pressure vessels and rail cars. Some industries served include oil & gas, military, commercial and recreational marine, chemical plant and industrial containment vessels.
Machinability
Machinability for 5083 is considered poor for this alloy.
Forming
Excellent
Welding
5083 is readily weldable using arch and resistance techniques.
Heat Treatment
5083 is not heat treatable.
For more technical information on this product, download the Product Data Sheet at the top of the page or contact our friendly professional sales team for assistance.
/Asset/3003-Flat-Sheet---Plate.jpg3003 Aluminum Perforated Sheet
(4) Don't see what you're looking for?Contact our friendly sales team for expert assistance in locating the right product for your needs.
Standards
ASTM-B-209 QQ-A-250/2
Principal Design Features
3003 Aluminum is alloyed with 1.20% manganese, which increases the strength of 3003 over commercially pure aluminum (1100 series). 3003 has excellent workability, weldability and good corrosion resistance. It is used for drawing, forming, spinning, fuel tanks, sheet metal works and other applications that require moderate strength for aluminum with good weldability. H14 designates the temper and means that 3003 has been strain hardened and partially annealed. In this condition, 3003 can be easily formed. Embossing or debossing 3003 in this temper should not strain or crack the aluminum.
Applications
3003-H14 is widely used for stampings, spun and drawn parts and products, cooking utensils, chemical equipment, builder’s hardware, storage tanks, truck and trailer components, mail boxes, cabinets, fan blades, awnings, siding, kitchen equipment, decorative trim, architectural uses, signage applications, etc. Where greater strength is required, consider 5052-H32. 3003-H224 is a designation for a variety of tread designs for tread plate, this product is often used for walk ways, bump zones trailer decks etc.
Machinability
Machinability for 3003-H14 is considered good.
Forming
Good.
Welding
3003-H14 is readily welded using common welding techniques.
Heat Treatment
3003-H14 is not heat treatable.
For more technical information on this product, download the Product Data Sheet at the top of the page or contact our friendly professional sales team for assistance.
/Asset/3003_Perforated_Sheet.jpg3003 Aluminum Tread Plate
(8) Don't see what you're looking for?Contact our friendly sales team for expert assistance in locating the right product for your needs.
Standards
ASTM-B-209 QQ-A-250/2
Principal Design Features
3003 Aluminum is alloyed with 1.20% manganese, which increases the strength of 3003 over commercially pure aluminum (1100 series). 3003 has excellent workability, weldability and good corrosion resistance. It is used for drawing, forming, spinning, fuel tanks, sheet metal works and other applications that require moderate strength for aluminum with good weldability. H14 designates the temper and means that 3003 has been strain hardened and partially annealed. In this condition, 3003 can be easily formed. Embossing or debossing 3003 in this temper should not strain or crack the aluminum.
Applications
3003-H14 is widely used for stampings, spun and drawn parts and products, cooking utensils, chemical equipment, builder’s hardware, storage tanks, truck and trailer components, mail boxes, cabinets, fan blades, awnings, siding, kitchen equipment, decorative trim, architectural uses, signage applications, etc. Where greater strength is required, consider 5052-H32. 3003-H224 is a designation for a variety of tread designs for tread plate, this product is often used for walk ways, bump zones trailer decks etc.
Machinability
Machinability for 3003-H14 is considered good.
Forming
Good.
Welding
3003-H14 is readily welded using common welding techniques.
Heat Treatment
3003-H14 is not heat treatable.
For more technical information on this product, download the Product Data Sheet at the top of the page or contact our friendly professional sales team for assistance.
/Asset/3003-Diamond_Tread-Brite.jpg3003 Aluminum Sheet and Plate
(15) Don't see what you're looking for?Contact our friendly sales team for expert assistance in locating the right product for your needs.
Standards
ASTM-B-209 QQ-A-250/2
Principal Design Features
3003 Aluminum is alloyed with 1.20% manganese, which increases the strength of 3003 over commercially pure aluminum (1100 series). 3003 has excellent workability, weldability and good corrosion resistance. It is used for drawing, forming, spinning, fuel tanks, sheet metal works and other applications that require moderate strength for aluminum with good weldability. H14 designates the temper and means that 3003 has been strain hardened and partially annealed. In this condition, 3003 can be easily formed. Embossing or debossing 3003 in this temper should not strain or crack the aluminum.
Applications
3003-H14 is widely used for stampings, spun and drawn parts and products, cooking utensils, chemical equipment, builder’s hardware, storage tanks, truck and trailer components, mail boxes, cabinets, fan blades, awnings, siding, kitchen equipment, decorative trim, architectural uses, signage applications, etc. Where greater strength is required, consider 5052-H32. 3003-H224 is a designation for a variety of tread designs for tread plate, this product is often used for walk ways, bump zones trailer decks etc.
Machinability
Machinability for 3003-H14 is considered good.
Forming
Good.
Welding
3003-H14 is readily welded using common welding techniques.
Heat Treatment
3003-H14 is not heat treatable.
For more technical information on this product, download the Product Data Sheet at the top of the page or contact our friendly professional sales team for assistance.
/Asset/3003_Flat_Sheet_Plate.jpg5052 Aluminum Sheets and Plates
(16)Don't see what you're looking for?
Contact our friendly sales team for expert assistance in locating the right product for your needs.
Principal Design Features
Magnesium is the primary alloying agent in the 5052 series and is one of the most effective and widely used alloying elements for aluminum. Alloys in this series possess moderate to high strength characteristics, as well as good weldablilityand resistance to corrosion in the marine environment. Because of this, aluminum-magnesium alloys are widely used in building and construction, storage tanks, pressure vessels and marine applications. Examples of common alloy applications include: 5052 in electronics, 5083/5086 in marine applications, anodized 5005 sheet for architectural applications and 5182 makes the aluminum beverage can lid. The U.S. military’sBradleyFightingVehicleis made with5083and the 7xxx series aluminum.
5052 Aluminum Tread Plates
(5)Don't see what you're looking for?
Contact our friendly sales team for expert assistance in locating the right product for your needs.
Principal Design Features
Magnesium is the primary alloying agent in the 5052 series and is one of the most effective and widely used alloying elements for aluminum. Alloys in this series possess moderate to high strength characteristics, as well as good weldablilityand resistance to corrosion in the marine environment. Because of this, aluminum-magnesium alloys are widely used in building and construction, storage tanks, pressure vessels and marine applications. Examples of common alloy applications include: 5052 in electronics, 5083/5086 in marine applications, anodized 5005 sheet for architectural applications and 5182 makes the aluminum beverage can lid. The U.S. military’sBradleyFightingVehicleis made with5083and the 7xxx series aluminum.
5052 Aluminum Perforated Sheet
Don't see what you're looking for?
Contact our friendly sales team for expert assistance in locating the right product for your needs.
Principal Design Features
Magnesium is the primary alloying agent in the 5052 series and is one of the most effective and widely used alloying elements for aluminum. Alloys in this series possess moderate to high strength characteristics, as well as good weldablilityand resistance to corrosion in the marine environment. Because of this, aluminum-magnesium alloys are widely used in building and construction, storage tanks, pressure vessels and marine applications. Examples of common alloy applications include: 5052 in electronics, 5083/5086 in marine applications, anodized 5005 sheet for architectural applications and 5182 makes the aluminum beverage can lid. The U.S. military’sBradleyFightingVehicleis made with5083and the 7xxx series aluminum.
5454 Aluminum Plates
Don't see what you're looking for?Contact our friendly sales team for expert assistance in locating the right product for your needs.
5454 Aluminum Alloy is an alloy in the wrought aluminum -magnesium family (5000 or 5xxx series). It is closely related to 5154 Aluminum Alloy. As an aluminum -magnesium alloy, it combines moderate-to-high strength with excellent weldability. Like 5154, 5454 aluminum is commonly used in welded structures such as pressure vessels and ships. As a wrought alloy, it can be formed by rolling, extrusion, and forging (although forging is not common), but not casting. It be cold worked to produce tempers with a higher strength but a lower ductility. It is generally not clad. /Asset/image001--2-.jpg
5456 Aluminum Sheets and Plates
(11) Don't see what you're looking for?Contact our friendly sales team for expert assistance in locating the right product for your needs.
5456 Aluminum Alloy is an alloy in the wrought aluminum-magnesium family (5000 or 5xxx series). While it is closely related to 5456 Aluminum Alloy (Aluminum Association) designations that only differ in the second digit are variations on the same alloy), it is used in structural applications, like most other aluminum-magnesium alloys, and not as filler for welding. As a wrought alloy, it can be formed by rolling, extrusion, and forging (although forging is not common), but not casting. It can be cold worked to produce tempers with a higher strength but a lower ductility. It is susceptible to exfoliation corrosion when held at temperatures above 65 °C (150 °F) for extended periods of time. /Asset/image001--2-.jpg
Steel Sheet and Plate
(8) Don't see what you're looking for?Contact our friendly sales team for expert assistance in locating the right product for your needs.
Carbon Steel is a steel with carbon content up to 2.1% by weight. The definition of carbon steel from the American Iron & Steel Institute (AISI) states:
Steel is considered to be carbon steel when:
No minimum content is specified or required for chromium, cobalt, molybdenum, nickel, niobium, titanium, tungsten, vanadium or zirconium, or any other element to be added to obtain a desired alloying effect;
The specified minimum for copper does not exceed 0.40 percent;
Or the maximum content specified for any of the following elements does not exceed the percentages noted: manganese 1.65, silicon 0.60, copper 0.60.
The term "carbon steel" may also be used in reference to steel which is not stainless steel; in this use carbon steel may include alloy steels.
As the carbon percentage content rises, steel has the ability to become harder and stronger through heat treating; however, it becomes less ductile. Regardless of the heat treatment, a higher carbon content reduces weldability. In carbon steels, the higher carbon content lowers the melting point. /Asset/steel-sheet-and-plate.jpg
6061 Aluminum Sheets and Plates
(20) Don't see what you're looking for?Contact our friendly sales team for expert assistance in locating the right product for your needs.
6061 and 6063 are the two most popular extrusion alloys. 6063 aluminum occupies the number one spot and 6061 occupies spot number two. As alloys in the 6000 series, they both have magnesium and silicon as their primary alloying elements. Thus, they have many similar properties. 6061 offers higher strength, however. As such, it is often used for more structural applications. 6063, on the other hand, is used for applications such as railing or trim, windows, and doors where strength is less of a factor in the decision-making process. 6061 Strength is Medium to High, good corrosive resistance, weldability, workability & machinability is also considered good. T6 is Solution heat-treated and artificially aged. T451 is solution heat-treated, stress relieved, then naturally aged. T651 is solution heat-treated, stress relieved by stretching and then naturally aged. T6511 is solution heat-treated, stress relieved by stretching and then artificially aged with minor straightening. /Asset/6000-Aluminum-sheet-and-plate.jpg
5083 Aluminum Armor Plate meets (MIL-DTL-46027)
(7)Don't see what you're looking for?
Contact our friendly sales team for expert assistance in locating the right product for your needs.
Principal Design Features
Magnesium is the primary alloying agent in the 5083 series and is one of the most effective and widely used alloying elements for aluminum. Alloys in this series possess moderate to high strength characteristics, as well as good weldablilityand resistance to corrosion in the marine environment. Because of this, aluminum-magnesium alloys are widely used in building and construction, storage tanks, pressure vessels and marine applications. Examples of common alloy applications include: 5052 in electronics, 5083/5086 in marine applications, anodized 5005 sheet for architectural applications and 5182 makes the aluminum beverage can lid. The U.S. military’sBradleyFightingVehicleis made with5083and the 7xxx series aluminum.
Stainless Steel Sheets and Plate
(55) Type 301 is an austenitic chromium-nickel stainless steel. This alloy is non- magnetic in the annealed condition, but becomes magnetic when cold worked. High strength and excellent corrosion resistance make Type 301 Stainless Steel useful for a wide variety of applications. Typical uses include aircraft structural parts, trailer bodies, diaphragms, utensils, architectural and automotive trim, automobile wheel covers, roof drainage products, tableware, storm door frames, conveyor belts, sinks, subway cars and appliancesType 304/304L is the modern version of "18-8" stainless steel containing approximately 18% chromium and 8% nickel and is the most commonly specified stainless steel used throughout the world. Type 304/304L is a versatile, general purpose stainless steel with good resistance to atmospheric corrosion, and to many chemicals and food and beverages. These grades can be specified in the annealed condition where they have very good formability. Higher nickel versions can be specified to enhance multi-stage deep drawing characteristics. Higher strength, cold-worked conditions can also be specified for Type 304/304L for spring type applications. Type 304/304L is non-magnetic in the annealed condition but may become slightly magnetic as a result of cold working.
Type 316/316L is a chromium nickel austenitic stainless steel containing molybdenum. The molybdenum addition enhances the corrosion resistance over that of 304/304L in halide environments as well as in reducing acids such as sulfuric and phosphoric acid. Type 316L can be dual certified as 316 when the composition meets the lower carbon limit of 316L and the slightly higher strength levels of 316. Type 316L should be specified for welded applications as the low carbon version eliminates chromium carbide precipitation and enhances the corrosion resistance in the as-welded condition. /Asset/Stainless-Steel-Sheet---Plate.jpg
Stainless Steel Sheet (5086-H116)
(41) 5086-H116MTR's Provided upon request.
Marine Grade - ABS
Other Sizes Available.
Many Cut Sizes Available.
For more technical information on this product, download the Product Data Sheet at the top of the page or contact our friendly professional sales team for assistance. /Asset/Aluminum-Sheet-Plate.JPG
Stainless Steel Sheet (5083-H116)
(41) 5083-H116MTR's Provided upon request.
Marine Grade - ABS
Other Sizes Available.
Many Cut Sizes Available.
For more technical information on this product, download the Product Data Sheet at the top of the page or contact our friendly professional sales team for assistance. /Asset/Aluminum-Sheet-Plate.JPG
Stainless Steel Sheet (5086-QQ-A-250/7)
(41) 5086-QQ-A-250/7 ASTM B928MTR's Provided upon request.
Marine Grade - ABS
Other Sizes Available.
Many Cut Sizes Available.
For more technical information on this product, download the Product Data Sheet at the top of the page or contact our friendly professional sales team for assistance. /Asset/Aluminum-Sheet-Plate.JPG
Stainless Steel Sheet (5083-QQ-A-250/6)
(41) 5083-QQ-A-250/6 ASTM B928MTR's Provided upon request.
Marine Grade - ABS
Other Sizes Available.
Many Cut Sizes Available.
For more technical information on this product, download the Product Data Sheet at the top of the page or contact our friendly professional sales team for assistance. /Asset/Aluminum-Sheet-Plate.JPG
5086 Aluminum Sheets and Plates
(26)Don't see what you're looking for?
Contact our friendly sales team for expert assistance in locating the right product for your needs.
Principal Design Features
Magnesium is the primary alloying agent in the 5086 series and is one of the most effective and widely used alloying elements for aluminum. Alloys in this series possess moderate to high strength characteristics, as well as good weldablilityand resistance to corrosion in the marine environment. Because of this, aluminum-magnesium alloys are widely used in building and construction, storage tanks, pressure vessels and marine applications. Examples of common alloy applications include: 5052 in electronics, 5083/5086 in marine applications, anodized 5005 sheet for architectural applications and 5182 makes the aluminum beverage can lid. The U.S. military’sBradleyFightingVehicleis made with5083and the 7xxx series aluminum.
Stainless Steel Plate (5086-QQ-A-250/7)
(41) 5086-QQ-A-250/7 ASTM B928MTR's Provided upon request.
Marine Grade - ABS
Other Sizes Available.
Many Cut Sizes Available.
For more technical information on this product, download the Product Data Sheet at the top of the page or contact our friendly professional sales team for assistance. /Asset/Stainless-Steel-Plate.JPG
Stainless Steel Plate (5083-QQ-A-250/6)
(41) 5083-QQ-A-250/6 ASTM B928MTR's Provided upon request.
Marine Grade - ABS
Other Sizes Available.
Many Cut Sizes Available.
For more technical information on this product, download the Product Data Sheet at the top of the page or contact our friendly professional sales team for assistance. /Asset/Stainless-Steel-Plate.JPG
Armor and Ballistic Plate
Armor & Ballistic Steel Plate is designed for a wide variety of military specifications and structural uses that require armor steel plate approved by all US departments and agencies for combat and defense applications. Armor & ballistic steel plate can be utilized in the manufacture of military vehicles, structural housings with high protection, armaments and other protective structures and varied applications. /Asset/Armor_Plate.jpg5086 Aluminum Tread Plates
(4)Don't see what you're looking for?
Contact our friendly sales team for expert assistance in locating the right product for your needs.
Principal Design Features
Magnesium is the primary alloying agent in the 5086 series and is one of the most effective and widely used alloying elements for aluminum. Alloys in this series possess moderate to high strength characteristics, as well as good weldablilityand resistance to corrosion in the marine environment. Because of this, aluminum-magnesium alloys are widely used in building and construction, storage tanks, pressure vessels and marine applications. Examples of common alloy applications include: 5052 in electronics, 5083/5086 in marine applications, anodized 5005 sheet for architectural applications and 5182 makes the aluminum beverage can lid. The U.S. military’sBradleyFightingVehicleis made with5083and the 7xxx series aluminum.